PC-112563 Tower speaker system Instruction Manual Zhong Shan City Richsound Electronic Industrial Ltd QunLe Industrial Area, East Shagang Road GangKou, ZhongShan, GuangDong, China
Contents Important Safety Instructions............................................................................................... 2 Safety..........................................................................................................................................................................................2 Warning...............................................................................................................................................................................
Important Safety Instructions 10 Protect the power cord from being walked on or pinched par ticularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus. 11 Only use attachments/accessories specified by the manufacturer. 12 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a car t or rack is used, use caution when moving the car t/apparatus combination to avoid injury from tip-over.
Do not place the unit on the amplifier or receiver. Don’t place this unit close to the damper, or the moisture will affect the life of the laser head. Should any solid object or liquid fall into the system, unplug the system and have it checked by qualified personnel before operating it any further. Do not attempt to clean the unit with chemical solvents as this might damage the finish. Use a clean, dry or slightly damp cloth.
Identifying the Parts Main Unit Remote Control Top View 1 /BASS Select a preset sound effect: Bass 1, Bass 2, Bass 3. - Adjust the time. 2 H/ Decrease the volume level. 3 3 Press this button to turn on or switch to the Eco Power standby mode. 4 FUNCTION Press this button repeatedly to select a source. In bluetooth mode, skip to previous track. Tune to a radio station by searching backward. Select previous radio station. In Standby mode: Adjust brightness level.
Preparations Connections Prepare the Remote Control Connect Power The provided Remote Control allows the unit to be operated from a distance. Caution: • • Even if the Remote Control is operated within the effective range (6m), remote control operation may be impossible if there are any obstacles between the unit and the remote control. - Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit.
- Set the Clock Use a RCA to 3.5mm stereo audio cable to connect the MP3’s headphone sockets to the AUX(R L) socket on the unit. The built-in clock shows the correct time in the display panel. 1. In standby mode, press and hold the CLOCK button to activate the clock setting mode, hour indicator will blink. 2. Set the hour with the or button. 3. Press CLOCK button to confirm, minute indicator will blink. 4. Set the minutes with the or button. 5.
Pair with Bluetooth-enabled Device Using One Touch (NFC) Note: - The operational range between this player and a Bluetooth device is approximately 8 meters. - Before you connect a Bluetooth device to this unit, familiarize yourself with the Bluetooth capabilities of the device. - Compatibility with all Bluetooth devices is not guaranteed. - Any obstacle between this unit and a Bluetooth device can reduce the operational range.
Troubleshooting 1. Pair your device with the player. 2. Star t to play music via your device (if it supports A2DP) To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this unit, check the following points before requesting service. 3. Use supplied remote control to control play ( if it supports AVRCP) - To pause/resume play, press theBF/ . - To skip to a track, press the,H/G, .
Specifications General Power Requirements............................................................................................................................................AC120V~ 60Hz Power Consumption..................................................................................................................................................................30W Output Power...........................................................................................................................