Specifications

16
3
Assemble the lower back brace (DH) as shown using hard-
ware #2 and #4 (x4). Assemble the Side supporting bar
(DQ) to the left cart legs using hardware #2 and #4 (x2).
Assemble the upper back brace (DH) to both cart legs as
shown using hardware #2 and #4 (x4). Then afix the side
support bar (DQ) to the front, left cart leg (DD) and the
front, right cart leg (DB) using hardware #2 and #4 (x2).
4
Assemble the upper and lower front panel (DF & DG) using
#3 and #4 (x8) as shown.
5
Assemble the bottom brace (DL) to the Front and back,
right cart legs (DB & DC) as shown, using hardware #2 and
#4 (x2). Insert the end caps (DM) into the bottom of the
right cart leg (DB & DC). Assemble the second bottom
brace (DL) to the front and back, left cart legs (DD & DE)
as shown, using hardware #9 and #10 (x2). Please ensure
that the left bottom brace is assembled with the flat side
down. Assemble the 2 wheels (DN) to the bottom of the left
cart leg (DD & DE) using the wheel axle (DO). Once in
position, affix the wheel bolt washer (hardware #11) and the
hitch-pin (hardware #9).
“Cone” Side of
wheel facing inwards
toward cart leg.