User Manual

TF2047903-MC-00-ENG Page 18 of 21 20161205 V.2
Step 3: Attach burner (2) to the steel stand (1) as shown in Fig. A. Fasten the
burner inlet first by using 1 M6x12 bolt (A). For the side of burner head, attach both
the burner and the chain of the rain cover (6). Put the M6x12 bolt (A) through the
chain hole of rain cover (6), the hole of burner bracket (3) and the mounting hole of
steel stand (1). Fasten the bolt by using 1 M6 nut (B).
Step 4: Attach the air vent (5) to the inlet of the burner (2). Insert the brass fitting of regulator
hose assembly (4) into the burner and tighten. Be sure not to strip threads on brass fitting.
DO NOT OVERTIGHTEN. Proper connection is critical for correct operation of unit.
Figure A
A
B
A
Figure B
A
4
5