User Manual

TF2047903-MC-00-ENG Page 10 of 21 20161205 V.2
A
B
WARNING
 Do not insert any tool or foreign object into the valve outlet or safety relief valve.
You may damage the valve and cause a leak. Leaking propane may result in
explosion, fire, severe personal injury, or death.
 Never attempt to attach this appliance to the self-contained LP gas system of a
camper or trailer or motor home.
 The pressure regulator and hose assembly supplied with the appliance must be
used. Replacement pressure regulator and hose assemblies must be those
specified by the appliance manufacturer.
WARNING
 Do not use appliance until leak-checked.
 If leak is detected at any time, STOP.
 If you cannot stop a gas leak, immediately close LP tank valve, leave area of
appliance, and call LP gas supplier or your fire department!
Leak-testing Valves, Hoses and Regulator
1. Turn all control knob(s) to OFF.
2. Be sure regulator is tightly connected to LP tanks.
3. Completely open LP tank valve by turning hand-wheel
counter-clockwise. If you hear a rushing sound, turn gas off
immediately: there is a major leak at the connection. Correct
before proceeding.
4. Brush soapy solution onto indicated connections
shown at right in (A) and (B).
5. If “growing” bubbles appear, there is a leak. Close
LP tank valve immediately and retighten connections.
If leaks cannot be stopped, do not try to repair. Use
only replacement parts specified by manufacturer.
6. Always close LP tank valve after performing tank test
by turning hand-wheel clockwise.