User Manual

Care and Cleaning

1. Dissolve 1-2 tablespoons (15-30 ml) of powdered dish detergent in 1-2 cup (250-500 ml).

2. Soak in the Blender Jar for one hour.

3. Empty Jar then rinse with water.

4. Dry.

Periodic Jar Sanitizing

1. To sanitize, ﬁll the Jar with hot water.

2. Add 1 tablespoon (15 ml) of liquid chlorine bleach.

3. DO NOT turn Blender on. Use spoon to gently and carefully stir for 10 seconds. Let mixture stand in Jar for ten

minutes.

4. Empty water/bleach mixture. Without rinsing, set Jar aside to air dry. Then place onto Blender Base ready for

next use.

Tamper, Lid and Cap

1. Clean the Tamper, Lid and Cap with warm soapy water.

2. Air or towel dry with a so towel. Then place onto Blender Base ready for next use.

WARNING: Exercise extreme caution when handling the Jar, the Blades are very sharp.

Blender Base

1. Unplug from the wall outlet. Wipe exterior housing with a so damp soapy cloth.

NEVER immerse Blender Base in water or any other liquid.

NEVER allow any liquid to enter the interior of the Blender Base.

NEVER use stiff brushes or abrasive cleaners or pads to clean the Blender Base as this will scratch or dull the

surface.

2. Li the Centering Platform off the Blender Base and wash the Platform in warm soapy water. Rinse and Dry.

3. Should the Switches or Speed Control become sticky, clean with a cotton swab dampened with a mild liquid

detergent. Dry immediately.

NOTE: The Jar is dishwasher safe on the top rack ONLY. However, to prolong the life of the Blender

parts we recommend you hand wash the Jar, Lid, Cap and Tamper by hand as described above.