User Manual
7
TM
General Use
Blending Dry Ingredients
1. Always review the General Use instructions above.
2. DO NOT operate the Blender continuously for more than 90 seconds when processing dry ingredients.
3. When chopping nuts or other dry mixtures, ensure even chopping by adding more than enough ingredients to
cover the Blades
4. With Jar in place on Blender Base turn the Speed Control counter-clockwise to the minimum setting. Flip the
On/Off Switch to On position (I). Then slowly increase the speed to the appropriate level. Take care to not
overprocess.
5. For more accurate control of the blending process use the Pulse function and stop processing when the contents
have reached the desired size or consistency.
Blending hot liquids
1. Always review all the General Use instructions above.
2. WARNING: When filling the Jar with hot liquids take care to prevent splashing that could cause injury.
3. Allow hot liquids to stand for a few moments to permit steam to escape before processing.
4.Before placing the Jar on the Blender Base, ensure that the Filler Cap is turned clockwise and securely locked
into the Lid. Then push the Lid/Cap firmly onto the Jar.
NEVER remove the Cap or add ingredients while the hot contents are being processed.
5. Extreme caution must be exercised when moving a Jar containing hot liquids.
6. With Jar in place on Blender Base turn the Speed Control counter-clockwise to the minimum setting. Flip the
On/Off Switch to the On position (I) then slowly increase the speed to maximum. Allow the Blender to run until
the desired temperature or consistency is reached.
6. DO NOT remove the Lid, Cap or Jar until the Blender is switched to the Off position (O), the Cord has been
unplugged and the blades have stopped turning.
7. Once the Jar has been removed from the Blender, carefully twist and li off the Cap to permit excess steam to
escape. CAUTION: The Cap may be hot.
8. WARNING: The Drive Socket, Locking Nut and Blades become very hot. DO NOT touch. Allow them to cool down
before handling or cleaning.
NOTE:
1. Chopping/grinding hard ingredients may scratch or mar the inside of the Jar. This will in no way alter
the performance of your Blender. However, over time continued use in this manner may dull the Blades
or cause cracks to appear in the Jar.
2. Some ingredients may cause discoloration of or impart odors to the Jar that remain even aer
cleaning.