User Manual

13
ASSEMBLY INSTRUCTIONS
11
ELECTRONIC IGNITION ASSEMBLY
a. Remove the Ignition Battery Cover (CH2) and
the plastic nut from the Electronic Ignition Box
(CH1).
b. Position the Electronic Ignition Box (CH1)
through the opening in the Right Side Shelf
Fascia (DI) and secure using the plastic nut.
c. Insert one “AA” battery into the battery
compartment (CH1) with the positive end
facing outward, as shown. Secure using the
ignition button cover (CH2).
* Battery not included.
d. Insert the Electrode Set, Main Burner Wire (CI)
and the Side Burner Electronic Wire (DE) into
the Electronic Ignition Assembly (CH1)
as shown. Ensure that the wires are pushed
in rmly.
Note: Both wire connectors are the same.
A
B
C
Underneath right side shelf
Underneath right side shelf
Underneath right side shelf
DI
CI
DI
Battery
Plastic Nut
CH1
CH1
CH1
DE
DI
CH2
+
-