User Manual

12
ASSEMBLY INSTRUCTIONS
10
BA
DI
DI
DH
BA
BH
DI
CJ
DH
DH
RIGHT SIDE SHELF ASSEMBLY
TIP: Do not tighten until all hardware is in place.
a. Mount the right side shelf (DH and DI) onto
the two support brackets, located on the right,
upper side panel of the burner box (BA).
b. Assemble the right side shelf (DH and DI) to
the upper side panel of the burner box (BA), by
positioning hardware through the interior of
the burner box, as shown in gure B.
c. Assemble the front of the right side shelf (DH
and DI) to the control panel (CJ), as shown in
gure C.
d. Complete the right side burner side shelf
assembly (DH and DI) by connecting the side
shelf, the rear of the Burner Box side panel (BA),
and the Upper Back Panel (BH), as shown in
gure D.
YOU WILL NEED:
YOU WILL NEED:
YOU WILL NEED:
A
C
D
View, under right side shelf
Back, right side view
D1
C1
C1
A1 B2
Front, right side view
View inside burner box
DH
BA
DI
B
A1
B2
A1
B2
2
12
X 2
X 2
4
X 2
6
X 2
2 5 6 11 9
X 2 X 2 X 2 X 1 X 1
C1
D1
1 5 6
X 1 X 1 X 1
TIP: Ensure that the rubber side of the
rubberized washer makes contact with the
burner box.