User Manual

12
ASSEMBLY INSTRUCTIONS
10
BA
DJ
DJ
DI
BA
BH
DJ
CG
DI
DI
RIGHT SIDE SHELF ASSEMBLY
TIP: Do not tighten until all hardware is in place.
a. Mount the right side shelf (DI and DJ) onto the
two support brackets, located on the right,
upper side panel of the burner box (BA)
b. Assemble the right side shelf (DI and DJ) to
the upper side panel of the burner box (BA), by
positioning hardware through the interior of
the burner box, as shown in gure B.
c. Assemble the front of the right side shelf (DI
and DJ) to the control panel (CG), as shown in
gure C.
d. Complete the right side burner side shelf
assembly (DI and DJ) by connecting the side
shelf, the rear of the Burner Box side panel (BA),
and the Upper Back Panel (BH), as shown in
gure D.
YOU WILL NEED:
YOU WILL NEED:
YOU WILL NEED:
A
C
D
View, under right side shelf
Back, right side view
D1
C1
C1
A1 B2
Front, right side view
View inside burner box
DI
BA
DJ
B
A1
B2
A1
B2
2
12
X 2
X 2
4
X 2
6
X 2
2 5 6 11 9
X 2 X 2 X 2 X 1 X 1
C1
D1
1 5 6
X 1 X 1 X 1
TIP: Ensure that the rubber side of the
rubberized washer makes contact with the
burner box.