User Manual

7
ASSEMBLY INSTRUCTIONS
6
LEFT SIDE SHELF ASSEMBLY
TIP: Do not tighten until all hardware is in
place.
a. Mount the Left Side Burner Side Shelf (DA and
DB) onto the two support brackets, located
on the left, upper side panel of the Burner Box
(BA).
b. Assemble the Left Side Burner Side Shelf (DA
and DB) to the upper side panel of the Burner
Box (BA), by positioning hardware through the
interior of the Burner Box (BA), as shown in
gure B.
c. Assemble the front of the Left Side Burner Side
Shelf Assembly (DA and DB) to the Control
Panel (CH), as shown in gure C.
d. Complete the Left Side Burner Side Shelf
Assembly (DA and DB) by connecting the side
shelf, the rear of the Burner Box side panel
(BA), and the Upper Back Panel (BK), as shown
in gure D.
YOU WILL NEED:
YOU WILL NEED:
BA
DB
DA
DB
DA
D
A
Back, Left side view
Front, Left side view
View inside burner box
Front, left side view
YOU WILL NEED:
DA
DB
BA
B
A1
A1
B2
B2
BK
BA
2
12
X 2
X 2
4
X 2
6
X 2
A1 B2
2 5 6 11 9
X 2 X 2 X 2 X 1 X 1
C1
D1
1 5 6
X 1 X 1 X 1
DB
CH
DA
C
C1
C1
D1
TIP: Ensure that the rubber side of the
rubberized washer makes contact with the
burner box.