GRILL TURISMO 4-BURNER Convertible BARBECUE TM Assembly Manual 085-3137-6 / G45323 1 Year limited Warranty Read and save manual for future reference. Assemble your grill immediately. Missing or damaged parts claims must be submitted within 30 days of purchase date. For product inquiries, parts, warranty and troubleshooting support, please call 1-855-453-2150. ANSI Z21.58-2015 / CSA 1.6-2015 ANSI Z21.58-2015 / CSA 1.6-2015 ANSI Z21.58-2015 / CSA 1.
H E A V Y A RTICLE NEEDS 2 TO LIFT THIS MANUAL MUST REMAIN WITH THE PRODUCT AT ALL TIMES To ORDER non-warranty replacement parts or accessories, or to register your warranty, please visit us on the web at www.masterchefbbqs.com CAUTION DANGER Sharp edges. Wear gloves when assembling your grill. Read and follow all safety statements, assembly instructions, use and care directions before attempting to assemble and cook. 1. If you smell Gas: a. Shut off gas to the appliance. b. Extinguish any open flame.
HARDWARE PACK TOOLS NEEDED FOR ASSEMBLY Key # Description 1 1/4” - 20 UNC x 38 Screw 2 1/4’’ - 20 UNC x 18 Screw 3 1/4” - 20 UNC x 13 Screw 4 1/4” - 20 UNC Nut 5 φ7 Lock Washer 6 φ7 Washer 7 NO.10 - 24 UNC x 10 Screw 8 φ5 Lock Washer 9 φ5 Washer 10 M4 Wing Nut 11 ST4.
Parts List for 085-3137-6 / G45323 Quantity Description Part No.
EXPLODED DIAGRAM FOR 085-3137-6 / G45323 AC BJ AE BI AA AF DC AB AD BG BH BB DI BF CG DH DG DA BA DD BE BD BD BC CA DE DF CD CE DB CB CH CC BK BL CK DJ CL EB CI DK CJ CF1 EA CF2 F4 EH EG ED EI EI EC EE EF Quantity 2 2 1 1 5 5 5 F5 - Custom Bezel Kit Description Lid Handle Bezel - Blue Lid Handle Bezel - Gray Thermometer Bezel - Blue Thermometer Bezel - Gray Control Knob Bezel - Orange Control Knob Bezel - Blue Control Knob Bezel - Gray EJ Part No.
ASSEMBLY INSTRUCTIONS 1 Note: Two people required for all assembly steps. EF Separate the 2 different types of castors: 2 Locking Castors (EE) and 2 Regular Castors (EF). EF EE EE Front ED Back A Note: Regular Castors (EF) need to be assembled to the front of the Bottom Shelf (ED), and Locking Castors (EE) need to be assembled to the back of the Bottom Shelf (ED), as shown in image A.
ASSEMBLY INSTRUCTIONS 3 THIS STEP REQUIRES 3 PEOPLE. DO NOT ATTEMPT ALONE. EXTREMELY HEAVY! A + B Position the Top Lid Assembly and Burner Box Assembly (A & B) onto the Cart Assembly (C), as shown. C Front View 4 Attach the Upper Back Panel (BK) to both the Left And Right Side Panels (EB & EC). Attention: Assembly of the Upper Back Panel (BK) will be completed in Step 6 and 9.
ASSEMBLY INSTRUCTIONS 5 Assemble the Door Support Rail (EA) to the Left and Right Upper Side Panels (EB and EC), as shown. WARNING: This part may have sharp edges. Wear protective gloves when assembling.
ASSEMBLY INSTRUCTIONS 6 Left side shelf assembly TIP: Do not tighten until all hardware is in place. DA a. Mount the Left Side Burner Side Shelf (DA and DB) onto the two support brackets, located on the left, upper side panel of the Burner Box (BA). BA b. Assemble the Left Side Burner Side Shelf (DA and DB) to the upper side panel of the Burner Box (BA), by positioning hardware through the interior of the Burner Box (BA), as shown in figure B.
ASSEMBLY INSTRUCTIONS 7 a. Remove the hardware that is pre-assembled to the Side Burner Valve (DE). DB DE Assemble the Side Burner Valve (DE) to the Left Side Shelf Fascia (DB), using the hardware removed, as shown in figure A. DF AA b. Assemble the Side Burner Control Knob (#13) to the Side Burner Valve (DE). You will need: DB DE 13 13 X1 A B 8 a. Position the Side Burner (DG) through the opening in the Left Side Burner Drip Pan (DD).
ASSEMBLY INSTRUCTIONS 8 b. Make sure that the Side Burner (DG) engages the Side Burner Valve (DE). Attach the Wing Nut (#10) to the Side Burner (DG), as shown in figure B. You will need: 10 DE DG X1 B Left side view c. Attach the end of the Side Burner Electrode Wire (DH) to the underside of the Side Burner Electrode (DG), as shown. Ensure that the wire is pushed in firmly. DG DH C View from underneath left side shelf d.
ASSEMBLY INSTRUCTIONS 9 Right Side Shelf Assembly TIP: Do not tighten until all hardware is in place. a. Mount the Right Side Shelf (DJ and DK) onto the two support brackets, located on the right, upper side panel of the Burner Box (BA). DJ BA DK b. Assemble the Right Side Shelf (DJ and DK) to the upper side panel of the Burner Box (BA), by positioning hardware through the interior of the Burner Box (BA), as shown in figure B.
ASSEMBLY INSTRUCTIONS 10 Electronic Ignition Assembly Battery a. Remove the Ignition Battery Cover (CF2) and the plastic nut from the Electronic Ignition Assembly (CF1). DK + - CF2 Plastic Nut CF1 b. Position the Electronic Ignition Assembly (CF1) through the opening in the Right Side Shelf Fascia (DK) and secure using the plastic nut. A c. Insert one “AA” battery into the battery compartment (CF1) with the positive end facing outward, as shown. Secure using the Ignition Button (CF2).
ASSEMBLY INSTRUCTIONS 11 Assemble the Heat Shield (CI) to the bottom of the Door Support Rail (EA) and the Upper back panel (BK), as shown in figure A and B.
ASSEMBLY INSTRUCTIONS 12 a. Assemble the Left and Right Tracks (CK and CL) for the Grease Tray (CJ), as shown in figures A-C. EA You will need: 11 CL CK EB EC X2 A CI CL CK B Close up, back CL CK C Close up, front b. Insert the Grease Tray (CJ) into the opening of the Upper Back Panel (BK).
ASSEMBLY INSTRUCTIONS 13 Assemble the Door Handle (EI) to the Left and Right Door Assembly (EG and EH).
ASSEMBLY INSTRUCTIONS 14 a. Assemble the Right Door Assembly (EH), to the Bottom Shelf (ED) by inserting the fixed pin (bottom of door) into the hole provided (figure B). EA EH EC ED A EH ED B Close up, bottom of door b. Assemble the top of the Door Assembly (EH) to the Door Support Rail (EA), by pressing in the door support pin and aligning with the hole located on the top right corner of the door (figure C).
ASSEMBLY INSTRUCTIONS TM YOUR MODEL includes the CONVERTIBLE VALVE SYSTEM™. If you would like to convert your BBQ from PROPANE to NATURAL GAS, the following kit is required. Convertible Valve System™ Natural Gas Conversion Kit - product number: 085-2261-4 (available at Canadian Tire). Before completing steps 15 to 17, follow the steps outlined in the CONVERTIBLE VALVE SYSTEM™ instruction manual that accompanied the kit.
ASSEMBLY INSTRUCTIONS 16 Place the Cooking Grates (BI) into the Burner Box (BA). BI BI 17 Insert the two small positioning rods of the Warming Rack (BJ) into the rear panel of the Burner Box (BA).
ASSEMBLY INSTRUCTIONS 18 For Propane Model Only a. Attach the Regulator coupling nut (CB) to the LP cylinder valve. b. Position the 20 lb propane tank onto the Bottom Shelf (ED), and secure using the bolt (already attached) located on the underside of the Bottom Shelf (ED), as shown in figure C. CB ATTENTION ED FOR YOUR SAFETY, DO NOT ATTEMPT TO LIGHT THIS BBQ UNTIL YOU HAVE REVIEWED PAGES 4-8 OF THE MASTER CHEF® SAFETY & CARE MANUAL.
ASSEMBLY INSTRUCTIONS 19 HOW TO CONVERT YOUR BBQ TO NATURAL GAS This barbecue was sold PROPANE READY, if you wish to run your barbecue on Natural Gas you must purchase the Natural Gas Conversion Kit sold at Canadian Tire, product number: 085-2261-4.
WARNING HOT SURFACES ! ! CAUTION! • AVOID BURNS! • DO NOT TOUCH WHEN BBQ IS IN USE! • EXTREMELY HOT SURFACE! * SHADED AREAS BECOME EXTREMELY HOT WHEN IN USE.
CUSTOMIZE YOUR BARBECUE Your barbecue comes with TWO ADDITIONAL SETS OF BEZELS! Follow these instructions if you would like to change your bezel color to gray or electric blue! 01 Choose your color from the Custom Bezel Kit (F5). X1 X5 X2 02 Remove Control Knobs (CC) from the Control Panel (CH) and Side Shelf Fascia (DB).
CUSTOMIZE YOUR BARBECUE 03 IMPORTANT: CHANGE 1 BEZEL AT A TIME. REMOVING ALL CONTROL KNOB BEZELS MAY CAUSE MANIFOLD TO SHIFT MAKING ASSEMBLY VERY DIFFICULT. Remove the hardware securing the Control Knob Bezel (CD) to the Side Shelf Fascia (DB). Put hardware aside. A Assemble the Control Knob Bezel of your choice back to the Side Shelf Fascia (DB), using the hardware removed in Step 3-A.
CUSTOMIZE YOUR BARBECUE 04 IMPORTANT: CHANGE 1 BEZEL AT A TIME. REMOVING ALL CONTROL KNOB BEZELS MAY CAUSE MANIFOLD TO SHIFT MAKING ASSEMBLY VERY DIFFICULT. Remove the hardware securing the first Control Knob Bezel (CD) to the Control Panel (CH). Put hardware aside. A Assemble the new Control Knob Bezel (CD) back the Control Panel (CH), using the hardware removed in Step 3-A. B Repeat for remaining bezels, changing one bezel at a time.
CUSTOMIZE YOUR BARBECUE 05 Assemble Control Knobs (CC), removed in Step 2, back to Control Panel (CH) and Side Shelf Fascia (DB).
CUSTOMIZE YOUR BARBECUE 06 Remove Thermometer (AD), Thermometer Bezel (AE), and hardware from Top Lid Assembly (AA). Put hardware aside. 07 Assemble Thermometer (AD) and new Thermometer Bezel (AE) back to Top Lid Assembly (AA), using hardware removed in Step 6.
CUSTOMIZE YOUR BARBECUE 08 Remove Lid Handle (AB) and Lid Handle Bezels (AC) from Top Lid Assembly (AA). Put hardware aside. A 09 Assemble Lid Handle (AB) and new Lid Handle Bezels (AC), back to Top Lid Assembly (AA), using hardware removed in Step 8.
Visit www.masterchefbbqs.com to complete product registration.
