User Manual

8
Model No. 085-3179 | Contact us: 1-855-803-9313
Assembly Instructions
Step 1
Step 2
A 8 Pcs
CAUTION: Two (2) people are required for assembly.
To complete assembly you will need:
(1) Leak detection solution (instructions on how to make the solution are included in the “Operating Instructions”
section of this manual).
(2) Precision-filled LP gas grill tank with Acme Type 1 external threaded valve connection.
Typical assembly is approximately one hour.
Do not return to place of purchase.
For assistance, call 1-855-803-9313 toll-free. Please have your owner’s manual and model number available for reference.
Note: The model number is printed on a label which can be found on the side of the firebox.
careful
Assembly Tips:
1. Select an area where you will assemble this product. To protect components, choose a smooth surface that’s free of
cracks or openings.
2. Spread out all parts.
3. Tighten all hardware connections by hand first. Then, before completing each step, go back and fully tighten all hardware.
Be careful not to over-tighten. That could damage surfaces or strip threads.
4. For best results, complete each step in the order presented.
Note: Steps 2 to 4 are best done with the barbecue carefully resting on its back as shown in Step 2.
Attach the leg support brackets (2) to the firebox using short screw(A).
Eight of the nuts (closest to the hot plate) are pre installed for your convenience.