User Manual

17
Care and Maintenance
After Each Use
1. Turn griddle o per “Turning O” section.
2. While the griddle is still warm, gently scrape o all food residue with a scraper.
3. Wipe down griddle surface, inner and outer walls with a towel or paper towels.
4. For stubborn food residue:
a. Light griddle per “Lighting” section.
b. Apply cooking oil onto griddle surface.
c. Allow oil to “boil” food residue o.
d. Repeat steps 1 through 3.
e. If necessary, use a BBQ stone and scrub the food residue o.
f. Continue with “Seasoning Griddle” instructions.
5. Wipe o griddle surface, inner and outer walls paper towels until clean.
Note: While drying, you may notice the towel has some discolouration. This is normal.
6. Apply finishing oil onto griddle surface, inner and outer walls and evenly coat with rolled up paper towels.
7. Light griddle per “Lighting” section.
8. Keep burners on and (HIGH) for 15 minutes or until finishing oil starts to smoke.
9. Turn griddle o per “Turning O” section.
10. Repeat steps 6-9 at least 2 more times.
11. Follow “Before Storing” section.
Refurbish the Griddle Surface
1. If griddle is o, light per “Lighting” section for 10 minutes. Then turn griddle o per “Turning O” section.
2. If griddle is on, turn griddle o per “Turning O” section.
3. While the griddle is still warm, use a scraper or metal spatula to remove as much rust and food residue as you can from the
griddle surface, inner and outer walls.
4. Apply a liberal amount of cooking oil onto the griddle surface.
5. Using a BBQ stone, scrub the griddle surface. Apply additional cooking oil as need.
6. Wipe o griddle surface, inner and outer walls with paper towels.
7. Repeat steps 3-5 until paper towels no longer show any rust.
8. Apply finishing oil onto griddle surface, inner and outer walls and evenly coat with rolled up paper towels.
9. Light griddle per “Lighting” section.
10. Keep burners on and (HIGH) for 15 minutes or until finishing oil starts to smoke.
11. Turn griddle o per “Turning O” section.
12. Repeat steps 7-10 until the surface has a nice dark colour.
13. Follow “Before Storing” section.