Specifications

17
6
Place Lid Assembly (AA) onto burner box (BA). Aligning
hinges (AD&BG). Hinges on lid (AD) fit inside hinges (BG)
on firebox. Secure using hinge pin and bolt.
BC
A
B
DB
A
A
B
A
DA
7
Place the top lid and burner box assembly (A + B) onto cart.
Fix the whole assembly to both cart legs (DA +DB) by using
hardware #1, #3 and #7 (x4).
Important: Make sure the fiber washers are secured inside
the firebox in this step to properly seal the lower casting.
Install hardware #2 and #3 into both sides of the firebox
(BA) to support the flame tamer. Then place the flame tamer
(BC) into the firebox as shown.
Assemble the lid handle(AB) to the top lid by using hard-
ware #5 and #6 (X2) as shown.
D
O
DP
8
Caution: Failure to install grease cup and hook will cause
hot greases to drip from bottom of grill with risk of fire or
property damage.
Attach the grease cup (DP) to the grease cup hook (DO). Hook
the grease cup + hook from the bottom burner box (BA) as shown.
1” Hinge Pin
(hardware #4)
Qty.2
Bolt
(hardware #9)
Qty.2
Grease Clip
Grease Cup
BG
AD