Specifications

17A. Attach the lid handle (AB) to the top lid (AA) using #11

(×2), #13 (×2) and #19 (×2).

17B. Attach the upper hinges (AD) to the back of the top lid

using #4 (×4), #7 (×4) and #13 (×4). e hinges should

curve downward when properly installed.

17C. Next, assemble the thermometer (AC) to the top lid (AA)

using the wing nut attached to the thermometer.

Attach the BBQ lid lower hinges (BG) to the back of the

Burner box using hardware #4 screw (4), #7 nut(4) and #13

ﬁber washer(4), as shown in Figure B.

Attach the remaining control knob (CC) onto the valve stem

and place the side burner grate (DJ) onto the side shelf.

Center flat portion

of hinge should be

at the bottom.

Back view

Figure B