Specifications

11A. Position the burner box (BA) onto the burner box support
brackets (DD & DE) using hardware #4 screw (4), #7nut
(4) and #13 fiber washer (4). Ensure that the gas jets from
the valves are engaging the burner tubes. If the burner is not
horizontally leveled, adjust the two screws that attach the
valve to the control panel.
Assemble the right and left side shelf brackets (DB and DC) to
the right side shelf (DA) using hardware #4 screw (4). Ensure
that bracket DB is assembled to the back side of the shelf, and
that bracket DC is assembled to the Front of the side shelf.
Place the burner assembly (BB) into the burner box (BA) using
hardware #4 screw (2) and #13 Fiber washer(2).
Insert hardware #5 screw (4), #7 nut (4) and #13 fiber washer
(4) to both the left and right sides of the burner box.
18
10
11
Short Ignitor Wire
12
Burner Tube
Valve
BB
BA
BA
CC
DA
DB
DC
11B. Attach the short igniter wire to
the back of the push button igniter.
11C. Assemble the control knobs.
Back
Front