Specifications

EA
FB
FH
FH
FI
FD
EB
EA
You must assemble parts at the same time in this step.
Position the control panel onto the front left and right upper leg
support (FA) using hardware #6 screw (4) to keep it in position.
Do not attach nut yet. Next, position the left and right burner
box support (DD and DE) as shown in the image. Complete
control panel assembly by using hardware #7 nut (4) to affix
hardware. Finally using hardware #6 screw (4) and #7 nut (4)
complete assembly of the burner box supports.
5A. Assemble the bottom rear brace (EA) to the back left and
right cart legs (FB and FD) using hardware #5 screw(4) and
#7 nut (4).
5B. Insert the wheel axle (FI) through one wheel (FH), through
the cart leg and into the second wheel (FH). Secure in
position using hardware #14 wheel bushing washer (1) and
#15 hitchpin (1).
Position the front panel (EB) in between the front left and right
cart legs and assemble using hardware #6 screw (4) and #7 nut (4).
16
4
6
5
Right
Right
Left
Left
Back view
Control Panel (CA)
DE
DD
CA
Right
Left