Specifications

A S S E M B L Y I N S T R U C T I O N S
Tools needed for assembly are shown below.
Before assembling the barbecue, please ensure
that you have all the hardware needed.
Before assembling the barbecue, read these instructions
carefully. Assemble the barbecue on a flat, clean surface.
Note: Do not fully tighten all the nuts during initial stage.
Grill is heavy. You should have two
people assemble the barbecue together.
Please refer to the part numbers underneath the hardware
name for use when ordering parts under warranty.
Hardware Pack List
ytitnauQrebmuNtraPnoitpircseD.oNyeK
1 1/4"-20UNC X13 Screw 20120-13013-036 4
2 1/4"-20UNC X30 Screw 20120-13030-036 4
3 1/4"-20UNC Nut 31220-13000-036 4
4 NO.10-24UNCx13Screw 20124-10013-036 30
5 NO.10-24 X30 Screw 20124-10030-036 16
6 NO.10-24X50 Screw 20124-10050-036 8
7 NO.10-24UNC Nut 31224-10000-036 42
8 NO.8-32UNC X10 Screw 20132-08010-036 2
9 ST4.2X10 Tapping Screw 22500-42010-136 3
10 NO.8-32 UNC Wing Nut 33300-08000-032 1
11 NO.10-24UNC Wing Nut 33300-10000-036 2
12 Fibre Washer A G437-0049-9000 4
13 Fibre Washer B G437-0050-9000 20
14 Wheel Bushing (washer) G305-0024-9088 1
5 8809-5000-603
G pin hctiH 51
4 8819-4000-603G egniH 61
17 Wing Screw,#10-24X3/8 G306-0025-9084 1
18 Clip, Venturi, Sideburner G305-0057-9000 1
19 Washer,for Lid Handle G306-0027-9300 2
Key #18: Side burner Venturi clip (x1)
Key #15: Hitchpin (x5)Key #14: Wheel Bolt Washer (x1)Key #13: Fiber Washer B (x20)
Key #10: No8-32UNC Wing Nut (x1)
Key #7: No10-24UNC Nut (x42)
Key #4: No10-24UNCX13 Screw (x30) Key #5: No10-24UNCX30 Screw (x16) Key #6: No10-24UNCX50 Screw (x8)
Key #3: 1/4”-20UNC Nut (x4)Key #2: 1/4”-20UNCX30 Screw (x4)Key #1: 1/4”-20UNCX13 Screw (x4)
Key #8: No8-32UNCX10 Nut (x2) Key #9: ST4.2X10 Tapping Screw (x3)
Key #11: No10-24UNC Wing Nut (x2) Key #12: Fiber Washer A (x4)
Key #17: No10-24UNC Wing Screw (x1)Key #16: Hinge (x4)
Key #19: Fibre Washer for handle (x2)
14