User manual

4
General Recommendations
- When unpacking avoid tipping unit more than 45 degress to preven contamination of
compressor oil colling system.
- Do not expose the equipment to heat sources such as stoves, ovens, green houses,
hot walls and solar radiantion.
- The equipment must be installed in a space with good air circulation and vetiltion to
maintain the performance of the freezer.
- Not recommened to installation in areas with high relative humidity, for example, a
laudry.
- Should be kept a minimum distance of 4 inches from the side and rear walls. If the
equipment is covered, you must also observe a distance of 4 inches at the top. The
freezer should be perfectly level to prevent damage to the refrigeration unit.
- The freezer may not be installed in narrow corridors, only secure locations with easy
access.