User`s guide

Broadcasting
QuickTime Multicast
97
Wirecast User Guide | 104730
7. Click the Save button to save your settings.
8. Start your broadcast by selecting Broadcast > Start Broadcast in the Main window.
QuickTime Multicast
Wirecast lets you broadcast to your local network so that any computer on that
network can view the broadcast. This is called multicast. To configure the broadcast
settings for a multicast, follow these steps:
1. Select Multicast under the Destination menu.
2. Enter the Video and Audio Addresses. This is the unique address the multicast
broadcast uses for video and audio. Although this looks like an internet address, it is
not. This address must be unique among applications on your network that use the
multicast protocol. Click the Generate button to generate random video and audio
addresses.
3. Enter the Video Port number. This is the port that the multicast protocol uses for
video. Normally, this is 5434.
4. Enter the Audio Port. This is the port that the multicast protocol uses for audio.
Normally, this is 5432.
5. Create an SDP File. You must create an SDP file every time you change any option
on this page (including the encoder preset). To create an SDP file click the gear icon
and select Save SDP File, navigate to the desired location, and click Save in the Save
Select Unicast
Click Save
Save SDP file
Enter Audio
Port
Enter Video
Port
Enter Address