User`s guide

Broadcasting
QuickTime Unicast
96
Wirecast User Guide | 104730
view all your streams. QuickTime choose which stream to use based upon the users
settings. This is a very handy way to broadcast multiple bit-rates at the same time.
QuickTime Unicast
Wirecast lets you broadcast to a specific computer. This is called unicast. To configure
the broadcast settings for a unicast, follow these steps:
1. Select Unicast under the Destination menu.
2. Enter the address. This is the domain name or IP address of the computer receiving
your unicast.
3. Enter the Video Port number. This is the video port on the computer receiving your
unicast.
4. Enter the Audio Port. This is the audio port on the computer receiving your unicast.
5. Create an SDP File. You must create an SDP file every time you change any option
on this page (including the encoder preset). To create an SDP file click the gear icon
and select Save SDP File, navigate to the desired location, and click Save in the Save
File dialog window. The SDP file must be given to the user to place on the computer
that receives your broadcast. Your remote viewer must open the SDP file using
QuickTime player.
Note: Your unicast information is not stored in this file. Only QuickTime Streaming
Server streams are saved to this file.
6. Save a Multi-stream Reference Movie (optionally present). This menu option is only
available if you have other settings which use Announce To QuickTime Streaming
Server.