User`s guide

Broadcasting
WM-Pull From Server
90
Wirecast User Guide | 104730
the bandwidth strain on the remote server. All you need is a good local connection to
the internet to push to the Windows Media Server.
Configuration Settings
Address Enter the Internet address of the Windows Media Server you use to broadcast.
Publish Point Enter the name of the file that is put on the server, and that is used as
part of the URL that your users use. Wirecast cannot know the resulting URL that your
users use, as this may vary depending on the installation of the Windows Media Server.
Contact your Windows Media Server administrator to understand how to build a
proper URL for your viewers, based on the Publish Point.
Auto Remove Check Auto Remove to remove the file used as the publish point when
the broadcast is over.
Username/Password Enter the user name and password for the Windows Media
Server. Contact your Windows Media Server administrator to obtain these. If there is no
user name or password required, leave these fields empty.
WM-Pull From Server
To access the WM-Pull From Server window, select Broadcast > Broadcast Settings (or
press the Ctrl+Y keys). From the encoder presets drop-down menu, select any of the
Windows Media based presets, and check the Pull From Server checkbox.
Select a
Windows
Media preset
Check Push
to Server