User`s guide

Broadcasting

Encoder Presets

Wirecast User Guide | 104730

The Flash queue displays how much data is currently buffered on your computer, which

is waiting to transfer to the server. The meter displays how many seconds worth of data

is in the queue. When the meter is full, there are 5 seconds worth of data in the queue.

The more bars, the longer the queue (less is better). It is normal to see periodic

flickering in the meter, especially if you are streaming near your data limit.

However, if the meter starts to go into the yellow or the red zone, then Wirecast is

attempting to stream too much data. Most likely this is due to your current upstream

limits. You should select a preset with a lower data rate to resolve this issue.

Encoder Presets

The Encoder Preset menu is located in the middle of the Broadcast Settings window.

The Filter, New, and Edit buttons provide optional settings for encoder presets. The

Destination menu is located below the Encoder Preset menu. The More button

provides optional settings for destinations.

Edit button

Encoder Preset

More button

New button

Filter button

Destination