User`s guide

213

Installation

Introduction

This topic guides you through installing (or upgrading) and activating Wirecast.

Topics

 Installing

 Activating

 Uninstalling

Installing

To install Wirecast, follow these steps:

1. Download the installer from the Telestream Website at:

http://www.telestream.net/wire-cast/overview.htm.

2. Run the installer (.exe) program and follow the instructions provided

Note: During installation, you will be asked if you want to install the Virtual

Microphone feature. If you do (recommended), check the displayed check box and

continue the installation. Installing Virtual Microphone requires administrative rights.

3. If you have an older version of Wirecast already installed on your computer, the

installer upgrades to the newer version.Agree to the license terms and follow the

instructions displayed by the installer program.

Activating

When you purchased Wirecast a serial number was provided. This serial number must

be registered in the Wirecast program to unlock the features of Wirecast. To register

Wirecast follow these steps: