User`s guide

Introduction

Using AutoLive

Wirecast User Guide | 104730

Using AutoLive

Some users of Wirecast may want to single-click a shot to make it become live. Other

users may want to make several changes to the broadcast before making them live. You

can use both methods in Wirecast.

The AutoLive feature is designed to offer a single-click operation for those users who

want to simply click from shot to shot. The Edit window (or other windows) is not

affected by the status of AutoLive.

When AutoLive is on, clicking a shot in the Main Window makes it become live. As a

result, the Go button becomes inactive. Shift+Ctrl+Click loads a shot into the preview

but does not make it live.

When AutoLive is off, you click on a shot in the Main Window to display it in Preview,

then the Go button is required to make the shot live. Click Shift+Ctrl+Click to take a

shot live immediately.

Sometimes you may want to temporarily turn on and off (toggle) the AutoLive state.

Hold down the Shift and control keys at the same time to temporarily turn on Autolive.

This enables you to quickly switch AutoLive on for one action (i.e. a mouse-click), then

off again.