User`s guide

Using the Source Settings
Capture Cards
181
Wirecast User Guide | 104730
Capture Cards
Capture Cards are hardware extensions that enable you to bring in video from more
advanced HDMI and SDI sources. Most capture cards are automatically configured to
the best settings. Some cards (Blackmagic Intensity Pro, for example) require some
manual adjustments. When a Capture Card is selected, you can select the Frame
Format. Clicking Save causes the video to display. You can also check the De-interlacing
checkbox to turn on de-interlacing. Once configured, you can add Capture Cards from
the Live Source drop-down menu in the Main window.
If you experience difficulty with your Capture Card, make sure you have the latest driver
from the vendor and that it is installed correctly before contacting Customer Support.
Capture cards supported by Wirecast:
• Blackmagic Intensity Pro
• Blackmagic Intensity Shuttle
• Blackmagic Decklink Studio
• Blackmagic Decklink SDI
• Blackmagic Decklink Duo
• Blackmagic Decklink Extreme 3D
• Osprey 240e, 450e, 700e
• Matrox Multi
Show USB Devices
To view a list of all USB devices select Show USB Devices from the Sources menu. The list
displays all connected USB devices, the USB bus on which each USB device is located,
and the speed of the device. This information is helpful when troubleshooting USB bus
Frame Format
De-interlacing
Click Save