User`s guide

Using the Source Settings
Desktop Presenter
180
Wirecast User Guide | 104730
Another workflow is Outputting Wirecast to liveU using the external display output.
This works best if your wirecast computer supports HDMI output, which is then seen by
liveU as a camera source. In this workflow, the Wirecast output is sent into the liveU and
broadcast to LiveU servers. An Lu1000 with Wirecast on it can act as a server.
Desktop Presenter
The Desktop Presenter (DTP) is a utility application that enables Wirecast to broadcast
the desktop of any computer running Desktop Presenter.
Desktop Presenter is normally auto-detected by Wirecast and is automatically added to
the list of sources. However, if a DTP is not detected, or if you want to add one in a
remote location you can manually add it by selecting Sources > New Presenter from the
menu in the Main window.
You can then setup the presenter in the Source Settings window by entering an IP
address of the target computer, optionally checking the With Audio checkbox, and
clicking Apply:
Note: When a Desktop Presenter has been auto-detected, the IP Address field is
disabled.
For more information, refer to the Telestream Desktop Presenter User Guide.
Select Presenter
Enter IP Address
Check With Audio
(optionally)
Click Apply
Desktop Display