User`s guide

Using the Source Settings
LiveU
179
Wirecast User Guide | 104730
5. Start up Wirecast. The LiveU source displays in the Shot List area as liveu_[your unit
name]. The audio source is named liveu_[your unit name]_audio. Add both of these
sources to a single shot to begin using your LiveU backpack with Wirecast.
Note: If you encounter issues connecting your LiveU unit to the LiveU server
application, contact LiveU support at www.liveu.tv/support.html.
Using LiveU as an Output
Configure LiveU to stream to the destination of your choice. Connect your Wirecast
computer to your LiveU backpack using a DVI, VGA, or HDMI connection. For VGA and
DVI, you need to run an audio cable from your computer's audio out in to the LiveU
backpack.
Open Wirecast and enable External Display Output on the LiveU unit. Wirecast sends
video in to LiveU as though it were a camera. The Wirecast output can be re-broadcast
or sent straight to a Web destination.
LiveU Workflow Examples
One workflow example is making LiveU a source into Wirecast. This requires a LiveU
unit that supports outputting to the LU1000 software. The LiveU models supported are
LU30 and LU60 (possibly LU70). Once you configure the LiveU to send data to the
LU1000 software, you can then set up the LU1000 to present a stream to your
computer. Wirecast then sees the LU1000 as a source, enabling it to be added to a
wirecast document.
LiveU source display