User`s guide

Using the Source Settings
LiveU
177
Wirecast User Guide | 104730
enter the IP Address of the Teradek Cube, optionally check Deinterlace Video, enter the
number of milliseconds buffered, and click Apply:
The Number of milliseconds Buffered adds delay to the start of the video to
compensate for a network instability.
Note: When a Teradek has been auto-detected, the IP Address field is disabled.
LiveU
LiveU is a portable, video-over-cellular, video uplink system. LiveU uses a video encoder
and a series of parallel cellular modems to transmit video. LiveU uses high-profile H.264
encoding to provide uninterrupted video streaming from anywhere, directly to
Wirecast as a live camera source.
You can also send Wirecast output directly in to LiveU for transmission to another
broadcast destination.
For more information about LiveU, see www.liveu.tv.
Note: LiveU can only be used with Wirecast for Windows.
Using LiveU as a Source
Follow these steps to set up and use LiveU as a live camera source.
1. Download and install the LiveU server software provided by LiveU.
Click Apply
Enter the Number of
milliseconds Buffered
Check Deinterlace
Video (optionally)
Enter the IP
Address
Select New
Teradek