User`s guide

Using the Source Settings
Teradek Cube
175
Wirecast User Guide | 104730
When Use Audio is checked, audio from the camera is used if the camera has a
microphone.
Some supported IP Cameras also have motion controls (directional arrows) that enable
you to move the camera in different directions.
Note: When a IP Camera has been auto-detected, the IP Address field is greyed-out.
IP cameras must be set to H264 mode, rather than Motion JPEG mode. This setting is
usually performed in a Web console control panel for the IP camera. Refer the camera's
documentation for how to set up the camera.
Teradek Cube
Wirecast Pro integration with Teradek Cube™ turns any camera into a wireless camera.
You can plug any HD-SDI or HDMI camera into Teradek Cube™ to encode and submit
camera feeds directly over WiFi or Ethernet to Wirecast.
Note: To ensure that Wirecast recognizes the Teradek Cube, you must set the Teradek
Decoder Client to VCL (RSTP).
PRO
Select VLC
(RTSP)