User`s guide

Using the Source Settings
Pipelines
169
Wirecast User Guide | 104730
turns deinterlacing on enabling the video to avoid interlacing problems during motion.
Click Configure to configure the selected device.
When you click Configure, a properties window displays with two tabs. The Video Proc
Amp tab enables you to set the video display properties. The Camera Control tab
enables you to set camera image properties. Any properties that do not apply to the
selected camera are greyed-out.
Pipelines
Pipeline is a network-based video capture and play-out device for transferring SD and
HD SDI audio and video. Wirecast can use Pipelines on your local network as video
sources and bring them directly into your document. Wirecast usually detects local
Pipelines automatically using Bonjour Print Services, and adds them to the Source
Settings window. However, when necessary, you can add them manually by clicking
the plus (+) button in the bottom left corner of the Source Settings window and then
selecting Add Pipeline. This adds a new Pipeline source to the list of sources.
Select a
device
Select
resolution
Click to
configure
device
PRO