User`s guide

Using the Source Settings
System Devices
168
Wirecast User Guide | 104730
• The Button Bar contains two buttons. Click the plus (+) button to manually add new
sources. Click the minus (-) button to remove them.
Note: Audio that is out of sync with video is common when running a microphone
directly into your computer's audio input when using a FireWire camera as a video
source. Most FireWire devices create a latency that causes the audio to be ahead of the
video.
Note: In Wirecast versions 4.0 and above, de-interlacing has been moved from
System Preferences (where it was a global setting) to the Source Settings, where it is
individually controlled by each device.
System Devices
System devices include Firewire devices, USB cameras, and other USB devices. Click on
a device to select it. Two drop-down menus and a configuration button are displayed.
The Capture Device Size menu selects the device resolution from 160x120 to 1920x1080,
depending on the camera. The Device Deinterlacing menu selects either None or
Blend. None turns off deinterlacing enabling the video to interlace normally. Blend
Source List
Configuration
Area
Preview
window
Button Bar