User`s guide

Using the Audio Inspector
Overview
164
Wirecast User Guide | 104730
capture cards, Pipelines, etc. The remaining audio controls are associated with specific
shots.
Hardware Audio and Shot Audio
The Master control sets and displays the total audio output of your broadcast. Click the
headphones icon (directly below the Master controls) to mute the local audio feed.
(This has no effect on the broadcast audio output.) The Mute button, below the
headphones icon, mutes all local audio and all broadcast audio.
Below the name of each audio source is a white label box. You can rename this box to
as appropriate for the source, to avoid confusion during a broadcast. To rename the
audio source, click in the white box and enter the new name.
Hardware audio sources are automatically added to the Audio Inspector whenever a
new audio source is added through the Main window or through the Shot Editor. You
can also manually add a hardware audio source by clicking the Live Input drop-down
menu at the top of the Live Input section.
Master Audio control panel
Master Audio level control
Master Audio level display
Headphone Mute icon
Master Mute button
Live Input control
Shot control
Label box
Live Input
drop-down
menu