User`s guide

Using the Asset Manager
Re-assigning Media
134
Wirecast User Guide | 104730
with a new Desktop Presenter as a source. Additionally, if you select a camera input
source from the Media List, an additional menu to set the Device Aspect Ratio of the
camera is displayed. This is useful if the image aspect ratio of your camera is not
automatically picked up by Wirecast. In this case, select the correct aspect ratio from
the menu, click Apply, then click the corresponding icon in the Shot Selection.
5. Click Apply to replace the existing media, then close the Reassign Media window.
Select media
Select or Browse to
new media
Click Apply and
close window
Select an aspect ratio