User`s guide
Broadcasting
Flash Record To Disk
119
Wirecast User Guide | 104730
Flash Record To Disk
Wirecast offers the ability to save your broadcast to disk as either a Flash or MPEG-4 file.
To record your broadcast to disk, follow these steps:
1. Select an encoder preset.
2. Select Record To Disk.
3. Click Browse or enter the path to where you want your recording located.
4. Check the Auto Increment Filenames checkbox (optionally), if you want your
filename to have an incremental number appended to the end of it. This causes a
new file to be created every time you start recording to disk. If you do not check
this checkbox, then your previous file is overwritten.
5. Select a File Type. You can choose either Flash (.F4V) or MPEG-4 (.M4V).
6. Click Save to save your settings.
Select encoder
preset
Select Record
To Disk
Click Auto Increment
Filenames
(optionally)
Click Browse
to locate file
Select File Type