User`s guide

Broadcasting
Flash To Ustream
116
Wirecast User Guide | 104730
Flash To Ustream
To stream to Ustream, follow these steps:
1. Select a Flash preset from the Encoder Preset menu.
2. Select Ustream from the Destination menu.
3. Enter your Ustream username.
Note: Ustream may not yet support OpenIDs via this API. The solution is to download
the FMLE configuration file from Ustream and use the Flash Media Server interface.
4. After you have entered your username, click Authenticate to enter your password
and generate the RTMP URL. You only need to do this one time because Wirecast
stores the channel information for future streams. The default RTMP port is 1935.
You may need to configure your firewall to enable connections on this port.
Note: If you do not have a username and password, you can sign up with Ustream by
clicking the Ustream icon or by clicking Sign Up.
5. Select your Ustream channel.
6. Click Save to save your settings.
Select an
encoder preset
Select Ustream
Select Channel
Enter user name
Click Authenticate
and enter
password