User`s guide

Broadcasting
Flash To Streaming Media Hosting
113
Wirecast User Guide | 104730
Flash To Streaming Media Hosting
To stream to Streaming Media Hosting, follow these steps:
1. Select a Flash preset in Encoder Preset.
2. Select Streaming Media Hosting from the Destination menu.
3. Enter your Streaming Media Hosting username.
4. After you have entered your username, click Authenticate to enter your password
and generate the RTMP URL. You only need to do this one time because Wirecast
stores the channel information for future streams. The default RTMP port is 1935.
You may need to configure your firewall to enable connections on this port.
Note: If you do not have a username and password, you can sign up with Streaming
Media Hosting by clicking the Streaming Media Hosting icon or by clicking Sign Up.
5. Select your Streaming Media Hosting channel.
6. Click Save to save your settings.
Select an
encoder preset
Select
Streaming
Media Hosting
Select Channel
Enter user name
Click Authenticate
and enter
password