User`s guide

Broadcasting
Flash To Brightcove
103
Wirecast User Guide | 104730
Flash To Brightcove
To stream to Brightcove, follow these steps:
1. Select a Flash preset from the encoder presets menu.
2. Select Brightcove from the Destination menu.
3. Enter the domain name or IP address of your server (this is provided by Brightcove).
4. Enter the stream name of your broadcast (this is provided by Brightcove).
5. Click Set Credentials to enter your authorized username and password.
Note: If you do not have a username and password, you can sign up with Livestream
by clicking the Livestream icon or clicking Sign Up.
6. Click Save to save your settings.
Select encoder
preset
Select Brightcove
Enter Address
Click and enter
username and
password
Enter Stream