Specifications

Specifications
Architect’s & Engineer’s Specifications
MediaMatrix • A division of Peavey Electronics Corporation • http://mediamatrix.peavey.com
Features and specifications subject to change without notice • Copyright © 2011 Peavey Electronics Corporation, All rights reserved • Apr-01-11 • 80305712
Audio Processing Node
The audio processing node shall be a 2RU industrial package designed for fixed installation in engineered audio and communications systems. The unit shall
include an architecture based on an integrated floating-point Digital Signal Processor (DSP) engine with at least 3 DSP chips. The DSP shall be completely
configurable via a Windows-based software utility, with additional tools for creating user interface clients and integration with third-party control systems.
Customizable I/O, control and signal flow design algorithms shall be integrated within the design environment for intuitive system configuration. This software
shall include an XML architecture. Support for standard Ethernet management, including, but not limited to SNMP, shall be standard from an integrated, rear-
panel LAN port. The audio processing node shall include an embedded Linux operating system. The operating system shall reside on non-mechanical IDE
storage media. The storage system shall include support for reading/writing data from the operating system and configuration software. Audio file support for
.wav audio shall be standard and shall be completely integrated with the unit’s software tools. A non-mechanical storage device of at least 2GB shall be used
as the primary storage media and operating system root. The audio processing node shall include a modular I/O card bay system for support of four expansion
cards. Each expansion bay shall be capable of supporting not less than 16 inputs and 16 outputs of simultaneous audio. Cards shall be available for microphone
and line-level analog audio with options for digital and proprietary audio transports. The audio node shall optionally include a CobraNet or Dante audio
transport module with support for at least 64 20-bit digital audio channels. Separate software devices shall be provided for integrating the audio networking
module I/O into the configuration file. The audio processing node shall include support for serial data transport via the RS-232 and EIA-422/485 ports. All data
transports, including Ethernet, shall be available simultaneously and shall include software devices for integration into the configuration file. The audio processing
node shall include an integrated GPIO control system with at least 16 configurable low-current, low voltage ports and 4 configurable high-current ports. All
GPIO ports shall include software devices for integrating their function into the configuration file. The GPIO connections shall be externally terminated with a
DIN-rail breakout assembly (available separately). Status LEDs shall be included on the front panel for monitoring audio faults and power conditions. The audio
processing node shall be fan-cooled with a front panel intake and shall operate with a modular universal computer-grade power supply. The audio processing
node shall be the MediaMatrix NION nE or approved equal.
Rear Panel Connections
Mains Power: 100v > 240v 50/60 Hz 300W A/C
LAN: Female RJ-45 - transports control and
communications via Ethernet on Category 5e
(CAT5) cabling.
EIA-422/485 Serial: Female DB-9 - supports
bidirectional EIA-422/485 multi-dropped serial
communications.
RS232 Serial: Female DB-9 - supports general
purpose RS-232 communications.
CobraNet: Optional CM-1 Module with 2 Female
RJ-45 connectors for redundancy - transports
digital audio via CobraNet audio network on
CAT-5 cabling terminated with male RJ-45 jacks.
Dante: Optional DLM Module with 2 Female
RJ-45 connectors for redundancy - transports
digital audio via Dante audio network on CAT-5 or
better cabling terminated with male RJ-45 plugs.
GPIO: Female DB-25 - breaks out configurable
general purpose logic and status connections
to external DIN terminating block (available
separately).
I/O Bays: 4x Proprietary I/O Card Slots - supports
proprietary audio and interface cards, available
separately.
Digital Audio Performance
Data Format: 32-bit floating point audio.
Processing: PowerPC Host (Linux OS) with
3 ADI SHARC Hammerhead digital signal
processors.
DSP MFLOPS: 1200 sustained, 1800 peak.
Sample Rate: Configurable, 22.05KHz, 24KHz,
32KHz, 44.1KHz, 48KHz, 64KHz, 88.1KHz,
96KHz., supports multi-rate processing.
Latency: Configurable, minimum latency (analog
in to analog out @ 48kHz sample rate, 8 sample
vector) 1.8msec. Total latency varies with audio
configuration.
Storage: 2GB Compact Flash, supports OS,
configuration, control and .wav audio.
CobraNet Performance
Data Format: 20/24-bit audio.
Protocol: Ethernet w/ Proprietary CobraNet
protocol.
Channels: 32x32 channels at 48kHz.
Maximum CobraNet Latency: 3 sample
vectors.
Cable Length: 328 foot (100m) maximum.
Dante Performance
Data Format: 24-bit audio.
Protocol: Gigabit Ethernet / IP with proprietary
Dante protocol.
Channels: 32x32 channels at 48kHz.
Cable Length: 328 foot (100m) maximum.
GPIO
Connections: 25 pins with 16 individually
programmable pins, 4 switchable high current
outputs, plus a form C fault relay.
Configurations: Digital Input / Analog Input /
Digital Output software selectable.
Digital Input: Vin < 0.8v = logic 0; Vin > 2.0v =
logic 1 (1.2v hysteresis).
Analog Input: 0.0v < Vin < 24.0v; 12-bit analog
converter precision.
Digital Output: logic 0 Vout = 0.0v, Isink <=
2mA; logic 1 Vout = 3.3v, Isource <= 2mA.
High Current Outputs: 4 pins, each with a
0.5A self-resetting fuse and protection diodes for
driving inductive loads. Vout = 11.5v nominal @
Isource = 0.5A. Direct short protection from
ground to +36v.
Relay Contacts: Form C contacts rated at 0.3A
@ 125VAC or 110VDC, or 1A @ 30VDC.
Mechanical Specifications
Chassis Style: 2RU EIA rack package.
Dimensions: 19 in. W x 16.8 in. D x 3.5 in. H