Specifications

Issue 2 Page 10 of 13
Speaker bi-wiring
It is intention of the above feature to “bi-wire” the outputs with suitable speakers.
Such speakers must have at least four terminals; two for the treble, high frequency (or HF) driver and two more
for the bass, low frequency (or LF) driver.
Any “shorting links” between treble and bass input terminals (on the speakers) must be removed for maximum
benefit. These links normally are visible under the speaker’s terminals as gold plates/bars connecting the
terminals up in pairs.
Please consult speaker manuals/user support for more details.
Bi-wiring speaker leads connection diagram.
(Preamp, trigger and mains leads omitted for clarity).
Starting
Once all connections are made, switch on the unit, using the POWER button front of the unit. The MUTE LED
will light. Speaker outputs are muted for about 6 seconds, so no sound will be heard from the speakers. Once
the 6 seconds is up the MUTE LED goes out, indicating unit is settled, and ready for use.
RIGHT
Speaker
+HF
-HF
+LF
-LF
LEFT
Speaker
+HF
-HF
+LF
-LF