Specifications

Chapter 9: S6 Master Modules 87
Soft Keys Sections
The Automation Module provides two Soft Keys sections, each with twelve Soft Keys surrounding its own high resolution TFT dis-
play. Soft Keys navigation switches (below the displays) let you display different Soft Keys pages.
Each Soft Keys section has its has its own Soft Keys pages. You can customize Soft Keys using the Soft Key Editor (see Chapter 5,
“Soft Keys”).
Jog/Shuttle Wheel
The Jog/Shuttle Wheel can be assigned to several functions by enabling one of the mode switches. An LED ring surrounding the
Jog/Shuttle Wheel indicates wheel position and other values, depending on the current function of the wheel.
Move Selection/+, Function/-, and Trim are not implemented.
The following switches determine the function of the Jog/Shuttle Wheel.
Shift
Hold down Shift (1 in Figure 56) to access the secondary (upper) Jog/Shuttle Wheel functions.
Jog and Shuttle
In both Jog and Shuttle modes, rotating the wheel clockwise moves the transport forward, and moving it counterclockwise moves
it backward.
Jog Jog speed is proportional to the wheel movement, and stops when you remove your finger from the wheel.
Shuttle Shuttle speed is proportional to the wheel movement. Shuttle continues after you remove your finger (and after the wheel
stops) at the initiated speed.
Soft Keys section with Soft Keys (1) and navigation switches (2)
Figure 56. Jog Wheel, mode switches, and Shift key (1)
1
2
7
89
4
56
1
23
,
0Enter
Jog
Shuttle
Trim
Setup
Zoom Vertical
Zoom Horizontal
+
-
Shift
Scroll Vertical
Scroll Horizontal
Move Selection
Function
1