Specifications

Chapter 9: S6 Master Modules 82

Navigation Switches

Displays the Workstations page on the Settings screen (see “Workstations” on page 39).

Layout Mode

Enables Layout Mode. Shift + Layout Mode opens the Layout Recall grid. (See Chapter 8, “Layouts.”)

All

Enables All mode, in which pressing any strip Function switch on any Process Module enables that function on all strips. For

example, with All mode enabled pressing

Exp (Expand) on any strip places all strips into Expand mode. <Page> and Back

switches on each strip let you navigate through functions and parameters.

Tracks

Jumps to Tracks screen.

Clear Clip

Clears Clip (over) indicators from the meters.

◄/

Mixer

Nudges the surface left. Shift + ◄/Mixer opens and closes the audio application’s Mixer window unless the Edit window

is closed, in which case the Edit window opens first.

►/

Nudges the surface right. Shift + ►/Close closes the audio application’s front window.

Clear Solo

Clears all soloed channels.

◄◄/

Home

Banks the surface left. Shift + ◄◄/Home banks the surface so track 1 appears on fader strip 1 (left-justified).

►►/ End

Banks the surface right. Shift + ►►/ End banks the surface so the last track appears on the last fader strip (right-justi-

fied).

Display 1

Zooms all Display Module Waveform views out by 10 seconds.Shift + Display 1 zooms out by 1 second.

Display 2

Zooms all Display Module Waveform views in by 10 seconds. Shift + Display 2 zooms in by 1 second.

Settings

Jumps to Preferences screens.

Shift

Holding this Shift key accesses secondary functions on the Navigation switches as described above.

The following controls are not implemented:

Type, Flip, L Spill, R Spill

Navigation switches