Specifications

Chapter 9: S6 Master Modules 80
Attention Track Knobs
Eight touch-sensitive, dual-function Attention Track Knobs surround the touchscreen. They control Attention Track function pa-
rameters in the Home screen and monitor levels in the Monitoring screen. In addition to rotating, the knob can also be pressed in
certain contexts to enter a plug-in or send.
The knob and
In switch each have two automation LEDs (red and green).
In Toggles a parameter in and out, or between two values; it lights when active. The behavior depends on the audio application, and
not every parameter includes
In switch functionality.
Sel Toggles the knob function or a secondary parameter value. For example, Sel can toggle between Q and Frequency for an EQ
plug-in, or pre- and post-fader for a send.
Assigning Parameters to the Attention Track Knobs
To assign a bank of four parameters to the right or left Attention Track Knobs:
1 Select a a different group of four parameters in the Function Editor.
A bracket flashes slowly around the four selected parameters.
2 Before the bracket stops flashing, touch or turn an Attention Track Knob.
The four new parameters now appear on that knob’s side.
A left bracket (green in Figure 53) indicates the controls to its right are assigned to the left Attention Track Knobs.
A right bracket (purple in Figure 53) indicates the controls to its left are assigned to the right Attention Track Knobs.
Attention Track Knob (2) with Sel and In switches (1)
See “Setting the Track Automation Mode” on page 59.
Figure 53. Function Editor with brackets indicating which parameters are assigned to left (green) and right (purple) Attention Track Knobs
In
Sel
1 2