Specifications

Chapter 8: Layouts 74
3 Tap Track blocks in the upper track matrix to select the tracks you want in the Layout.
When tracks are selected in the Layouts screen their outlines are green as shown in Figure 48.
4 Tap a strip block at the bottom of the screen to place the currently selected track(s) on that strip.
When you tap on a strip block, the currently selected tracks are placed on the surface starting on that strip. For example:
• If four tracks are selected and you tap the first (left-most) strip block, the selected tracks are placed on strips 1–4.
• If four tracks are selected and you tap the fifth strip blocks, the selected tracks are placed on strips 5–8.
5 Repeat the previous steps to add and arrange other tracks in the Layout.
To include tracks from a different application or workstation, focus that application and then repeat the previous steps add its
tracks to the Layout.
6 When done, tap Store and then tap in the Layouts grid again to store the current Layout to that block.
7 To name the new layout do the following:
• Double-tap the
Layout Name field.
• Enter a name using the on-screen keyboard, then tap
Enter.
To exit Layout Mode:
 Press Layout Mode. The system returns to Banking mode and displays tracks from the currently focused DAW.
Figure 48. Three tracks selected to add to the Layout (green outline)
Figure 49. Selected tracks mapped to strips 1–3