Specifications

Chapter 7: Plug-ins and Sends 70
To navigate to other sends:
1 Make sure you are viewing the top level of Sends view (slots a–d). If not, press Back until slots are shown.
2 Press the lit ► (Page >) or ◄ (< Page) switch to navigate to additional sends.
Adjusting Sends on the Process Module
To edit Sends using the Process Module:
1 Assign a track with Sends to the surface.
2 Hold down Back and press Sends on that Process Module strip. The first Send appears on the Process Module knob.
3 Turn the knob to adjust this send level. In addition:
• Press the knob
In switch to mute (or unmute) the send.
• Press the knob
Sel switch to toggle the send between pre- and post-fader.
4 Press the lit ► (Page >) or ◄ (< Page) switch to navigate to additional sends.
5 Press Back to exit this send.
Process Module controls