Specifications

Chapter 7: Plug-ins and Sends 66
Chapter 7: Plug-ins and Sends
This chapter explains how to edit plug-ins and adjust Sends from the Master Module, Knob Module, and Process Module.
Plug-ins
Editing a Plug-in Using the Master Module
To edit a plug-in using the Master Module, you must first attention a track with a plug-in.
To attention a track, do one of the following:
 From the Fader Module, press Attention on the desired track.
 From the Home screen, touch a track in the Track Scroller or Meter Scroller (see “Home Screen Options” on page 32).
 From the Tracks screen, touch Attention, and touch a track in the Track Matrix. (Requires that the Track Selector option
Auto-Bank to Attentioned Track is enabled; see “Track Selector Options” on page 36.)
To edit the plug-in the Function Editor:
1 Touch Inserts in the Function Scroller.
The names of plug-ins inserted on the Attention Track appear on the Attention Track Knobs.
2 Press a knob to enter that plug-in.
For tracks with two or more plug-ins, the following actions occur on the Master Module:
• The
Back switch lights.
• The plug-in inserts expand in the Function Scroller.
3 Tap a different bank of four plug-in parameters to select them. Brackets flash slowly around them.
4 Before the brackets stop flashing, touch a left or right Attention Track Knob to assign the parameters to that side.
5 Use the Attention Track Knobs to adjust plug-in parameters.
6 For tracks with two or more plug-ins, press Back on the Master Module to exit the plug-in.
The plug-in inserts collapse back into the Inserts, and plug-in names appear on the Attention Track Knobs.
Inserts collapsed (left) and expanded (right)