Specifications

Chapter 4: Master Module Screens 41
Brightness
These settings manage the brightness of various S6 components, and can help save energy.
Auto When selected, light sensors at the top of the Master Module measure ambient illumination to set appropriate brightness
levels for the OLED, LED, Display Module, and touchscreen.
Touchscreen Touch and drag the slider to set the desired brightness.
OLED, LED, Display Module Touch and drag the slider to set their desired brightness.
Console Timeout Touch and drag the slider to set the desired time for displays to sleep when the system is inactive.
Soft Key LEDs Enabled When selected, LEDs in Soft Key switches on the Master and Automation Module light when enabled/ac-
tive. When unselected, Soft Key LEDs remain unlit regardless of their active or inactive state.
Workstation
General
Workstation Follows Knob Set Changes The workstation displays the controls selected on the Knob Module or Process Module.
Open Plug-ins on Workstation When Editing Opens plug-in windows on the workstation when editing a plug-in on the surface.
Close Plug-ins on Workstation When No Longer Editing Closes plug-in windows when another function is selected on the surface.
Solo
In Pro Tools, Solo Mode has three settings:
Solo In Place Mutes all tracks except the soloed track(s).
After-Fader Listen Solo signal is derived after the fader (AFL).
Pre-Fader Listen Solo signal is derived before the fader (PFL).
These features may not be implemented by all audio applications, so consult your documentation.
Workstation preferences
Solo modes are implemented differently by each audio application.