Specifications

Chapter 3: First Time Setup 21
Enabling EUCON Connectivity
You must enable EUCON connectivity in your audio application to work with S6. The following instructions show how to enable
EUCON in Pro Tools.
To enable EUCON connectivity in Pro Tools:
1 Make sure you have connected S6 to your Pro Tools computer via Ethernet as explained in “Connecting S6 to a Network” on
page 8.
2 Launch Pro Tools.
3 Choose Setup > Peripherals, and click the Ethernet Controllers page.
4 Select Enable EUCON.
5 Click OK. After a quick scan, S6 is ready to use with Pro Tools. You do not need to configure any other Ethernet Controllers set-
tings.
6 Connect the workstation running Pro Tools to S6. If you did not yet connect it, see “Connecting S6 to Workstations” on page 18.
7 Open a Pro Tools session if one is not already open.
8 Click in any Pro Tools window to bring it into focus.
9 Verify that the Mix window displays a blue border around each Pro Tools track name.
10 Verify that the S6 displays track names and other relevant session data.
Pro Tools Setup > Peripherals > Ethernet Controllers