Specifications

Chapter 10: S6 Channel Modules 106
Variable Waveform Zoom
When set to any Waveform view, the zoom resolution of all Display Modules can be set between 1 second and 60 seconds in the
Settings > Preferences screen. For more information, see “Waveform Zoom” on page 42.
Gain Reduction Meters and Bouncing Ball Dynamics Graph
(Pro Tools Only)
High resolution Gain Reduction Meters are displayed on Display Modules and the Master Module Home page. Lower resolution
Gain Reduction Meters (green) are displayed on the Fader Module between the two Level Meters. S6 gain reduction meters follow
the metering preference setting in the DAW, letting you choose to see compression, expansion, or a sum of both.
Dynamics Graphs with bouncing level ball can be displayed on Display and Master Modules by enabling any of the
Function views.
(Not all dynamics plug-ins support graphs or bouncing level ball.)
Unclaiming Display Modules
To unclaim a Display Module:
1 Create a file named “unclaim.txt” and copy it to a FAT-formated USB flash drive.
2 Plug the USB drive into the Display Module you want to unclaim. After a few seconds, the Display Module screen displays a
message that the process is complete.
Figure 67. Waveforms and Function
In Pro Tools, choose Setup > Preferences, and click to go the Metering tab. Gain Reduction settings are in the Display section.