Specifications

24
VIDEO TRIPODS, HEADS & SUPPORTS
Tripod Support Platform
While in the studio or on location, you can conveniently store
a monitor, laptop, projector, or i-Visor Case on the 14 x 10.1
x 1.3" (36 x 26 x 3.2cm) Calumet Tripod Support Platform.
This unit features one tripod support platform with 1/4"-20
and 3/8"- 16 reversible mount. It weighs only 2.4lbs (1.1kg)
and holds up to 44lbs (20kg). The 15" (38cm) MacBook Pro
fits perfectly on this handy platform. CK7030
Calumet Video Fluid Head with
Removable 70mm Head Bowl
The Calumet Video Fluid Head features a removable 70mm
head bowl that allows you the flexibility of using the head
for either video or still photography. Independent tilt and pan
drag control with built-in counter-balance system. Includes
quick-release plate with both 1/4" and 3/8" mounts. Load-
rated capacity of 15lbs (6.8kg) CK9075
Calumet Video Tripod Legs
The Calumet Video Tripod Legs feature a compact design,
3-section leg adjustments, a mid-level spreader, and secure
leg locks. It has a load-rated capacity of 24lbs (10.9kg), a
maximum height of 51.3" (130.3cm), a minimum height of
22" (55.9cm), folds down to 24" (61cm), and weighs just
5.4lbs (2.4kg). CK9167
Calumet Sliding Adapter Plate
The Calumet Sliding Adapter Plate is for use with the
Calumet CK9007 quick-release video head adapter. The
rubber pads grip your equipment to prevent shifting.
Includes both 1/4"-20 and 3/8"-16 camera screws and a
built-in, spring-loaded, camera alignment pin. CK9001
Calumet Quick-release Video
Head Adapter
Upgrade most heads to a quick-release system. The locking
handle can be repositioned by pulling outward. Camera
mounts using included 1/4"-20 or 3/8"-16 screws. Sliding
adapter plate includes a built-in, spring-loaded, camera
alignment pin. Push-button safety lock prevents accidental
release of adapter plate. CK9007
Cross Arm Assembly
This handy horizontal cross arm can be used to mount
multiple flash heads or cameras to your tripod or stand for a
variety of functions. The cross arm mounts to any column with
a 3/8” thread and allows for up to two flash heads or cameras
or a combination of one each to be attached to its two
horizontal sliding mounts. Each sliding mount features a 3/8”
thread. There are two more mounts at each end of the cross
arm, one 1/4"-20 and one 3/8”-16 for more mounting options.
An additional 1/4"-20 / 3/8”-16 platform is also included.
The cross arm can be used for a variety of purposes. It will
hold up to four flash heads for multiple flash setups. It can also
handle cameras up to medium format allowing for easy and
precise horizontal repositioning, or, for multiple exposures with
a single camera for stereo photography. The cross arm is
lightweight aluminium, measures 24” (61cm) in length and
weighs only 2.7lbs (1.2kg). CK7981